Buick Enclave manuals

Buick Enclave: Bulb Replacement

Buick Enclave 2008-2017 Owners Manual / Vehicle Care / Bulb Replacement

For the proper type of replacement bulbs, see Replacement Bulbs. Using the correct bulb type is important for proper brightness, electrical load, fitment, lamp performance, and safe operation.

For any bulb-changing procedure not listed in this section, contact your dealer. Some lighting components may require special access, specific handling, or professional service to avoid damaging the lamp housing, wiring, connectors, seals, or surrounding trim.

When replacing bulbs, avoid touching the glass portion of the bulb with bare fingers unless the bulb design allows it. Oil from skin can create hot spots on certain bulbs and may shorten bulb life. Always make sure the replacement bulb is seated securely and that the lamp assembly is reinstalled correctly to help prevent water intrusion, loose connections, or poor lighting performance.

READ NEXT:

 Halogen Bulbs. High Intensity Discharge (HID) Lighting. Taillamps, Turn Signal, Sidemarker, and Stoplamps

Halogen Bulbs WARNING Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb p

 License Plate Lamp. Replacement Bulbs

License Plate Lamp The license plate lamps illuminate the rear plate so it remains visible in low-light conditions. If one of these bulbs is burned out, dim, or intermittent, it should be replaced wit

SEE MORE:

 Heated Mirrors. Automatic Dimming Mirror. Park Tilt Mirrors

Heated Mirrors For vehicles equipped with heated mirrors: (Rear Window Defogger): Press to heat the mirrors. See “Rear Window Defogger” under Dual Automatic Climate Control System for more information. Automatic Dimming Mirror If equipped, the driver outside mirror adjusts automatically to red

 Description and Operation

TRANSFER CASE DESCRIPTION AND OPERATION Fig. 46: Identifying Transfer Case The transfer case in this vehicle uses an aluminum housing and contains an input helical gear, an output driven helical gear, a ring and pinion hypoid gear set, and an intermediate drive shaft. These components work together