Buick Enclave manuals

Buick Enclave: Engine Oil Pressure Light. Security Light. High-Beam On Light

Buick Enclave 2008-2017 Owners Manual / Instruments and Controls / Warning Lights, Gauges, and Indicators / Engine Oil Pressure Light. Security Light. High-Beam On Light

Engine Oil Pressure Light

Warning icon about low engine oil pressure and possible engine damage or fire riskWARNING
Do not continue driving if the oil pressure is low. Without proper oil pressure, the engine can overheat quickly and may become hot enough to catch fire.

Someone could be burned. Check the engine oil as soon as possible and have the vehicle serviced before driving farther.

Notice: Lack of proper engine oil maintenance can damage the engine. Repairs caused by improper oil maintenance would not be covered by the vehicle warranty.

Always follow the recommended maintenance schedule for engine oil changes and use the correct oil specification for the vehicle.

Engine oil pressure light that should illuminate briefly when the engine is started

The oil pressure light should come on briefly when the engine is started.

If the light does not come on during start-up, have the Buick Enclave serviced by your dealer so the warning system can operate correctly.

If the light comes on and stays on, engine oil may not be flowing through the engine properly. The vehicle could be low on oil, or there may be another problem in the lubrication system that requires immediate attention.

Security Light

Security light that should come on briefly when the engine is started

The security light should come on briefly when the engine is started.

If the system is working normally, the indicator light turns off after the start-up check. If it does not come on, have the vehicle serviced by your dealer.

If the light stays on and the engine does not start, there may be a problem with the theft-deterrent system.

This light also indicates the status of the anti-theft alarm system when the ignition is turned off.

The light will flash rapidly if the alarm system is arming and one or more monitored entry points are not fully closed. The light will stay on if the alarm is arming and all monitored entry points are closed.

For more information about this light and the Buick Enclave security system, see Anti-theft Alarm System.

High-Beam On Light

High-beam indicator light showing when the high-beam headlamps are active

The high-beam on light comes on when the high-beam headlamps are in use.

This indicator helps the driver confirm that the high beams are active, especially when driving at night or in low-visibility areas. See Headlamp High/Low-Beam Changer for more information.

    READ NEXT:

     Front Fog Lamp Light. Cruise Control Light

    Front Fog Lamp Light The fog lamp light comes on when the front fog lamps are in use. The light goes out when the fog lamps are turned off. Fog lamps are intended to improve visibility in fog, mist,

     Information Displays

    SEE MORE:

     Repair Instructions

    FRONT DISC BRAKE PADS REPLACEMENT Fig. 12: View Of Front Disc Brake Pads Front Disc Brake Pads Replacement Front disc brake pad replacement should be performed with attention to pad position, hardware condition, caliper movement, and rotor surface condition. The pads must seat correctly in the cali

     High Voltage Devices and Wiring. Electrical System Overload. Fuses and Circuit Breakers

    High Voltage Devices and Wiring WARNING Exposure to high voltage can cause shock, burns, and even death. The high voltage components in the vehicle can only be serviced by technicians with special training. High voltage components are identified by labels. Do not remove, open, take apart, or modify